FAQ

Yes, Chemikal States Oil Remover is highly effective on porous surfaces such as concrete, brick, and paving stones. These surfaces tend to absorb oil deeply due to their porous nature, making stains difficult to remove. The formula of Chemikal States Oil Remover is designed to penetrate these pores and lift out oil particles. When applied, the remover seeps into the surface and breaks down oil molecules, ensuring the complete extraction of the stain. After it has drawn out the oil, you can easily remove the dried residue by scraping or washing the surface.

For best results, it’s recommended to let the remover sit for at least 10-15 minutes on porous surfaces, especially if the oil has seeped deep into the material. In some cases, a second application may be necessary for older or more persistent stains.

Best Practices:

• Always ensure the surface is dry before applying the oil remover.
• For deeper stains, apply a thicker layer of the product and give it more time to work.
• Use a stiff brush to help agitate the remover and oil for maximum absorption.

While Chemikal States Oil Remover is formulated primarily for hard, porous surfaces like concrete and stone, it is not recommended for synthetic surfaces such as plastic, vinyl, or rubber. These materials can react negatively with the chemicals in the oil remover, potentially causing damage or discoloration. If you need to clean oil from plastic or vinyl surfaces, it’s best to use a cleaner specifically designed for synthetic materials to avoid any adverse effects.

If you’re unsure about the product’s compatibility with a surface, always conduct a spot test on a small, inconspicuous area to see how the material reacts before using it on the entire surface.

Best Practices:

• For plastics or synthetic surfaces, use a dedicated synthetic-safe cleaner.
• Conduct a small patch test in an inconspicuous area before full application.

It’s generally not recommended to use Chemikal States Oil Remover on painted surfaces. The powerful formula can potentially strip away or damage the paint, especially if the surface is already worn or aged. If oil has spilled on a painted surface, it’s advisable to clean it using a mild, paint-safe cleaner or degreaser.

However, if you still want to attempt using the product, test a small hidden section first to check if it causes any damage. After testing, if the paint holds up and no adverse reactions are observed, you may cautiously proceed with a full application, keeping in mind that you might need to touch up the paint afterward.

Best Practices:

• Avoid using the product on painted surfaces unless necessary.
• Test a small, hidden area first to assess paint compatibility.
• Consider repainting the surface after cleaning to restore its appearance.

Yes, Chemikal States Oil Remover can be safely used on eco-friendly surfaces like permeable pavers, which are designed to allow water to pass through the surface. However, it’s crucial to follow the product’s instructions carefully to ensure that the remover does not clog the permeable surface or compromise its ability to allow water infiltration. This is especially important in eco-friendly settings where water drainage is a key function of the surface.

When applying Chemikal States Oil Remover to permeable pavers, avoid using too much product, as the residue may block the pores of the pavers. Once the oil is absorbed, ensure thorough rinsing to remove any remaining product from the surface to restore its full permeability.

Best Practices:

• Apply the product sparingly to avoid clogging the surface.
• Rinse thoroughly after use to maintain the pavers’ permeability.
• For heavily stained areas, use a brush to work the product into the surface without overapplying.

Yes, Chemikal States Oil Remover is effective on asphalt surfaces and can help remove oil and grease stains commonly found on driveways or parking lots. Asphalt, however, is softer than concrete, so it’s important to follow application instructions carefully. Overuse of the remover on asphalt may weaken the surface, especially if left for too long or not rinsed properly after use.

For best results, apply the remover in a thin layer, wait for it to absorb the oil, and then gently scrub the area. Once the oil has been lifted, make sure to rinse thoroughly with water. Avoid leaving the product on the asphalt for extended periods, as this could lead to surface degradation.

Best Practices:

• Apply in thin layers to avoid damaging the asphalt.
• Don’t leave the remover on for extended periods.
• Always rinse the surface thoroughly to prevent any residue buildup.

Chemikal States Oil Remover is generally formulated for harder surfaces like concrete or asphalt and may not be suitable for delicate natural stones like granite or marble. These types of stones can be sensitive to certain chemicals, which might etch or damage their surfaces. If you need to remove oil stains from granite or marble, it’s recommended to use a pH-neutral cleaner that is designed specifically for natural stone. Always perform a spot test to ensure the product doesn’t cause discoloration or damage.

Best Practices:

• Avoid using Chemikal States Oil Remover on polished stone.
• Opt for stone-specific, pH-neutral cleaners for safe oil removal.
• Test a small, hidden area if you choose to apply the remover.

Chemikal States Oil Remover is not recommended for wooden surfaces, as the chemical formulation is designed for non-porous, hard surfaces like concrete. Wood is a porous material that can absorb the remover, potentially leading to staining or damaging the wood fibers. For wooden surfaces, it’s best to use a wood-safe degreaser or mild soap solution. If oil has penetrated the wood, sanding and refinishing might be necessary to restore the surface.

Best Practices:

• Avoid using on untreated or finished wood.
• Use wood-specific cleaners for oil removal.
• Consider sanding if oil deeply penetrates the wood.

Yes, Chemikal States Oil Remover can be safely used on metal surfaces such as steel or iron. The product is highly effective at breaking down oil and grease buildup on industrial machinery, tools, and automotive parts. After applying the remover, be sure to thoroughly rinse the metal to prevent any residue or film that could impact the finish or functionality of the metal. For sensitive metals like aluminum, perform a patch test first to ensure it does not cause any discoloration.

Best Practices:

• Use for cleaning oil off metal tools, machinery, and vehicles.
• Ensure thorough rinsing to avoid residue buildup on metal.
• Patch test on sensitive metals like aluminum.

It’s not recommended to use Chemikal States Oil Remover on asphalt shingles or roof tiles, as the product’s chemicals may weaken or discolor the shingles over time. Asphalt shingles are designed to be waterproof, and using oil removers could damage their protective coating. For removing oil stains from roofs, it’s best to use roof-specific cleaners or degreasers that are safe for asphalt shingles.

Best Practices:

• Avoid using on asphalt shingles and roof tiles.
• Use roof-safe cleaners to protect the integrity of the shingles.
• Test a small area before applying any cleaner to the roof.

While Chemikal States Oil Remover is highly effective at removing oil, it is not recommended for use in kitchens or food preparation areas due to its industrial-strength formula. Kitchens require food-safe cleaning products that are designed to be non-toxic and safe for surfaces that come into contact with food. For kitchen grease or oil stains, opt for food-grade degreasers instead.

Best Practices:

• Do not use in food preparation areas due to industrial strength.
• Use food-safe cleaners for kitchen oil and grease stains.
• Ensure that all cleaners used in kitchens are certified non-toxic.

Yes, Chemikal States Oil Remover can be used on stained or colored concrete surfaces, but caution is advised. While the product is formulated to lift oil stains, it may affect the coloring of the concrete if left on for too long or if the concrete has been treated with sensitive dyes. It is best to apply the remover sparingly and avoid prolonged contact to preserve the aesthetic of the concrete. Always do a spot test first to check for any adverse effects on the color or finish.

Best Practices:

• Use with caution on colored concrete to avoid fading.
• Apply sparingly and avoid prolonged contact with the surface.
• Perform a spot test to assess the product’s impact on the color.

Yes, Chemikal States Oil Remover can be used on sealed concrete surfaces, though it’s important to ensure the sealer is not compromised. Sealed concrete often has a protective coating that can be sensitive to harsh chemicals. If the sealant is damaged, the remover may cause discoloration or peeling. Always perform a patch test to make sure the sealer is unaffected. If the surface is already compromised, reapplication of the sealer may be necessary after cleaning.

Best Practices:

• Safe to use on sealed concrete but patch test first.
• Avoid leaving the remover on for extended periods.
• Reapply sealant if the surface becomes compromised.

Although Chemikal States Oil Remover is highly effective at breaking down oil, it is not suitable for use in commercial kitchens or food-related areas due to its industrial formulation. Commercial kitchens require food-safe, non-toxic degreasers that are specifically formulated for cleaning cooking surfaces. Chemikal States Oil Remover should be reserved for industrial or non-food-related areas where oil stains need to be removed from hard surfaces like concrete or metal.

Best Practices:

• Do not use in food preparation areas.
• Opt for food-safe degreasers in kitchens or restaurants.
• Reserve this product for non-food-related industrial cleaning tasks.

Yes, Chemikal States Oil Remover is highly effective for removing oil and grease buildup on automotive engines, car parts, and mechanical components. Its powerful formula penetrates deep into oil and grime, making it ideal for cleaning engine blocks, undercarriages, and other automotive surfaces. Be sure to rinse thoroughly after application to prevent any residue from affecting engine performance or part functionality.

Best Practices:

• Ideal for use on automotive engines and car parts.
• Rinse thoroughly to ensure no residue remains.
• Avoid applying to sensitive electrical components.

It is not recommended to use Chemikal States Oil Remover on composite decking materials. Composite decks are made from a blend of wood fibers and plastic, which may be damaged or discolored by the chemicals in the remover. For composite decking, it’s best to use a mild cleaner or a product specifically designed for composite materials to safely remove oil and grease stains without causing harm.

Best Practices:

• Avoid using on composite decking to prevent damage.
• Use a cleaner formulated specifically for composite materials.
• Spot test if unsure about surface compatibility.